• <track id="fausx"></track>
  • <p id="fausx"><del id="fausx"><menu id="fausx"></menu></del></p>

    Welcome to Dingtai Energy Conservation and Environmental Protection Technology's Website!
     Language choice:中文版
    Activated carbon adsorption desorption catalytic combustion
    Working principle:

    Using characteristics of microporous activated carbon adsorption of organic waste gas, after activated carbon adsorption saturation with hot air stripping, stripping process flow control through organic waste gas concentration can be 10 to 20 times, stripping of airflow set up by the catalytic bed electric heating device is heated to about 250 ℃, under the effect of catalyst combustion, catalytic combustion process of purification efficiency can reach more than 97%, the combustion generated after CO2 and H2O and release a lot of calories, the calories by catalytic combustion part of the heat exchanger in the bed and then used to heat the stripping of the high concentration of exhaust gas, the other part of the activated carbon stripping gas heating the air outside to do,Generally, the electric heater must be started for about 1 hour to reach the desorption ~ catalytic combustion self-equilibrium process. After the heat balance is reached, the electric heating device is shut down. At this time, the regeneration treatment system relies on the organic solvent in the waste gas as fuel, and the regeneration process reaches self-balance cycle without additional energy, which greatly reduces energy consumption and produces no secondary pollution. The whole adsorption and catalytic combustion process adopts PLC electrical automatic control.

    Copyright © Shaoxing Dingtai Energy Conservation and Environmental Protection Technology Co., Ltd. All rights reserved    浙ICP備2020040821號-1
    国产a片
  • <track id="fausx"></track>
  • <p id="fausx"><del id="fausx"><menu id="fausx"></menu></del></p>